Network Programming in .NET

This is one of those horrible asp.net error messages, when for no reason, you update some code with new code and you get an access is denied error.(*)

 

There are some sensible suggestions listed on msdn as to why this happens, and how it’s all down to indexer service – although, when you already have this service disabled, you’d wonder what’s up?

 

Basically, I went through these steps

Kill the asp_wp process

stop w3svc service

delete the bin folder

restart w3svc service, and go to offending page

stop the w3svc service

replace the bin folder with old files

restart the w3svc service.

 

It makes little sense why this works, but it worked for me.

 

 

(*) the specifics of the error (if you do view|Source) are

[FileLoadException]: Access is denied: ‘erc’.
   at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Boolean isStringized, Evidence assemblySecurity, Boolean throwOnFileNotFound, Assembly locationHint, StackCrawlMark& stackMark)
   at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Boolean stringized, Evidence assemblySecurity, StackCrawlMark& stackMark)
   at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark)
   at System.Reflection.Assembly.Load(String assemblyString)
   at System.Web.UI.CompilationConfiguration.LoadAssemblies(Hashtable original)
[ConfigurationException]: Access is denied: ‘erc’. (c:winntmicrosoft.netframeworkv1.1.4322Configmachine.config line 258)
   at System.Web.UI.CompilationConfiguration.LoadAssemblies(Hashtable original)
   at System.Web.UI.TemplateParser.AppendConfigAssemblies()
   at System.Web.UI.TemplateParser.PrepareParse()
   at System.Web.UI.TemplateParser.Parse()
   at System.Web.UI.TemplateParser.GetParserCacheItemThroughCompilation()
   at System.Web.UI.TemplateParser.GetParserCacheItemInternal(Boolean fCreateIfNotFound)
   at System.Web.UI.TemplateParser.GetParserCacheItemWithNewConfigPath()
   at System.Web.UI.TemplateParser.GetParserCacheItem()
   at System.Web.UI.ApplicationFileParser.GetCompiledApplicationType(String inputFile, HttpContext context, ApplicationFileParser& parser)
   at System.Web.HttpApplicationFactory.CompileApplication(HttpContext context)
   at System.Web.HttpApplicationFactory.Init(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)

When tweaking stored procedures, to make them run faster, we often compare them against a benchmark,

say SP_A vs SP_B.

 

However, if SP_A has been used actively, as part of a running system (i.e. website). it will be optimized by SQL server and will be placed in the procedural cache. This then results in Biased tests between SP_A and SP_B.

 

Therefore I would recommend using

DBCC FREEPROCCACHE

and

DBCC DROPCLEANBUFFERS

 

before timing the execution of SP_A against SP_B. Although, the affect of clearing the cache will cause them both to run slower, it will highlight performance gains of one against the other fairly.

 

 

 

I had a problem with a full text catalog stopping at a particular point, and not populating further,

 

To diagnose, problems like this, open C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOG

 

where I saw, Could not allocate space for object ‘sys.fulltext_index_map_1813581499’.’i2′ in database ‘CFGlobal’ because the ‘PRIMARY’ filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.

Therefore I just increased the space allocated to the primary filegroup, and it kicked off again.

 

If you have an Iframe on a page, and you press the back button, then oftentimes, only the Iframe goes back in it’s history, not the containing page.

 

There are a few workarounds for this, this is just a proposal, if it helps…

 

firstly, if you have a pre-loader on the iframe, such as…

 

graph.contentWindow.document.write(‘Please wait…’);
graph.src = ‘someurl’

 

when you can poll the Iframe for a change in the "Please wait message". (Note, that the url that you are redirecting to must be on the same domain as the parent page, or else you get a security exception)

 

// 951 – back button fix. 
 var wasGraphLoaded = false;
 setTimeout(‘checkGraph()’,500);
 function checkGraph()
 {
  if (imgGraph.document.body.innerHTML.indexOf("…")==-1)
  {
   // Graph must be loaded…
   wasGraphLoaded = true;  
   
  }
  else
  {
   // Graph isn’t loaded.
   if (wasGraphLoaded)
   {
    // The back button bust have been pressed
    window.history.go(-1);
   }
  }
  setTimeout(‘checkGraph()’,500);
 }

After finding out that my WISE installer had passed it’s 30 day limit, and my Installshield CD scratched beyond repair, I looked on the web for a free way to redistribute a VB6 application.

 

My first attempt, was Advanced Installer 4, which looked promising. However, it also, is a 30 day trial, if you want go beyond the absolute basics. For instance, my app required the Soap Toolkit,(a COM object), so that was beyond the basic version. Also, it couldn’t properly self-register the COM DLL’s in the Advanced mode either. – Waste of time.

 

I then came accross a Microsoft tool, Visual Studio Installer, which looked well. With a bit of fiddling, I got it to create an MSI. However, an MSI may not work first time on pre-XP machines, since the Windows Installer is not guaranteed to be on the machine, So I looked for a generic MSI to EXE converter

 

The best I found was this: http://www.tmgdevelopment.co.uk/setuputility.htm Which you place in the same folder as the MSI.

 

I zipped them both together, and placed them on the website.

 

 

I am almost cerain this is a bug in the .NET bitmap Codec, that you cannot change the color Depth… It always saves in its native format for Bitmap.

 

However, if you convert the image to a TIFF first, then it works.

 

 

 

 

 

(for reference:)

I was looking for some high performance code to convert a bitmap into a 2D byte array, this is what I came up with.

 

first I have a class called pixel.

{

  public byte red;

  public byte green;

  public byte blue;

}

 

then I read it using some Unsafe code thus:

public pixel[,] BitmapToArray(Bitmap b)

{

pixel[,] bmpData=new pixel[b.Width,b.Height];

// GDI+ still lies to us – the return format is BGR, NOT RGB.

BitmapData bmData = b.LockBits(new Rectangle(0, 0, b.Width, b.Height), ImageLockMode.ReadWrite, PixelFormat.Format24bppRgb);

int stride = bmData.Stride;

System.IntPtr Scan0 = bmData.Scan0;

unsafe

{

byte * p = (byte *)(void *)Scan0;

int nOffset = stride – b.Width*3;

int nWidth = b.Width * 3;

for(int y=0;y<b.Height;++y)

{

for(int x=0; x < nWidth; ++x )

{

switch(x%3)

{

case 0:

bmpData[x/3,y] =

new pixel();

bmpData[x/3,y].blue = (

byte)(p[0]);

break;

case 1:

bmpData[x/3,y].green = (

byte)(p[0]);

break;

case 2:

bmpData[x/3,y].red = (byte)(p[0]);

break;

}

++p;

}

p += nOffset;

}

}

b.UnlockBits(bmData);

return bmpData;

}

 

 

This is a handly little C# function to convert a DataTable to CSV. Hope it’s useful..

 

public string DataTableToCSV(DataTable dt)
 {
 string strCSV = "";
 string strSeperator = "";
 foreach(DataColumn dc in dt.Columns)
 {
  strCSV += strSeperator + dc.ColumnName;
  strSeperator = ",";
 }
 strCSV += "rn";
 foreach(DataRow dr in dt.Rows)
 {
  strSeperator = "";
  foreach(DataColumn dc in dt.Columns)
  {
   strCSV += strSeperator + dr[dc.ColumnName].ToString();
   strSeperator = ",";
  }
  strCSV += "rn";
 }
 return strCSV;
 }

I’ve had SQL server 2005 installed on my server for some time now, and sucessfully running a few websites from it. I’ve had to work from the command line up to now, since, I couldn’t get any good GUI working.

 

I tried to download SQL server 2005 Management studio express, for which I had to upgrade the .NET framework on the server, upgrade MSXML, and then install the application.

 

Try to connect and….

 

===================================

Cannot connect to .SQLEXPRESS.

===================================

An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 – Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)

——————————
Error Number: -1
Severity: 20
State: 0

——————————
Program Location:

   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

 

 

Crap.

 

Any ideas?

 

I was looking to localize a classic ASP website, and was considering upgrading it to ASP.NET, but it seemed way too much work, so I decided to look to see if it was possible to create a localization framework for classic ASP. using the same type of resx files that are used for asp.net

 

So, given a simple piece of xml in semi-typical resx format:

 

<root>
 <data name="Hello!">
  Ciao!
 </data>
</root>

 

I then wrote an include file in classic asp, to handle translations in the form

 

<%=Translate("Hello!")%>

 

(Precursed by a initResources("strings-it.xml"))

 

 

 Dim xmlResx

 Function initResources(ResourceFile)
  Set xmlResx=Server.CreateObject("Microsoft.XMLDOM")
  xmlResx.async=false
  xmlResx.load(Server.MapPath(ResourceFile))
 End Function
 
 Function Translate(english)
  Set objLst = xmlResx.getElementsByTagName("data")
  For i = 0 to (objLst.length -1)
    EnglishText = objLst.item(i).attributes.getNamedItem("name").text
 If english=EnglishText Then
  Translate= objLst.item(i).text
  Exit For
 End If
  Next
 End Function

 

20 Lines of code, prevented an overhaul of my application to .NET.

 

Ultimately, I plan this to be used for a spanish version of www.openmerchantaccount.com